Case for Raspberry Pi Computer.clear Acrylic Plexiglas. 2mm Thick.removable front

Features

• clear acrylic 2mm thick (You may have to remove a protective film on parts)
• Top movible
• no screws or standoffs.
• Full accese for all conectors

The Price Was:
Related ProductsRelated Products

• Edimax EW-7811Un 150 Mbps Wireless 11n Nano Size USB Adapter with EZmax Setup Wizard
• Raspberry Pi (Model B) - Revision 1 256MB
• Motorola Micro-USB Home and Travel Charger
• Raspberry Pi User Guide
• 4.3'' Color TFT Car Monitor Support 480 x 272 Resolution + Car/Automobile Rear-view System Mirror Display Monitor

Product Description

Technical Information

Customer Reviews

Product Description

The case comes as 6 pieces that snap together, made of clear acrylic.

This ingenious design has no screws or standoffs and there are cute little feet cut into the sides so that it stands up above your desk.

There are engraved labels on all the connector slots.

You can use all of the connectors on the edges of the Pi:HDMI, Audio, Video, SD slot, DSI slot , micro USB power, Ethernet and the two USB ports.

We also added a slot so that you can connect a 26-pin IDC RIBBON cable to the GP I/O.

For more advanced hacking, the enclosure is designed so that you can remove or open the top piece and plug any sort of cables you wish into the breakouts in the middle.

The case is airy enough PI logo that vents.

Raspberry Pi computer is not included. No other cables or connectors or accessories are included.

Assembly

1.Remove a protective film on parts.

2.There's a small part attached inside the Ethernet and USB cutout - snap this out and set it aside for later.The other small part is for led status used.

3.Peel the protective backing from all parts, With the paper removed.

4.if using a ribbon cable GPIO pins, install this on the board first.The pin 1 stripe should be positioned nearest the corned.

5.Position the first side of the case, with the GPIO side.

6.On the underside of the board, under the Ethernet jack, install the small spacer piece that was snapped out in Step 2.

7.Position the bottom piece over the board, slotting it into the first side. There are no markings on the top or bottom piece.

8.Position the HDMI side of the case.

9.Slide the top of the end piece over the two top hooks first, then, using very light pressure, pivot the end piece downward over the bottom two hooks. If you encounter ANY resistance, stop! Do not force this piece or you will break the plastic.

10.Put the small part on the led.Put the top.

Cheap Computer Cases, PC Cases: Mid Tower Cases: guitarreria ... Case for Raspberry Pi Computer.clear Acrylic Plexiglas. 3mm Thick ... Case for Raspberry Pi Computer.Blue marine Acrylic Plexiglas. 3mm Thick.removable front.with ... Case for Raspberry Pi Computer.clear Acrylic Plexiglas. 3mm ... Case for Raspberry Pi Computer.clear Acrylic Plexiglas. 3mm Thick.removable front.with LEGO holes - The case comes as 6 pieces that snap together, made of clear ... Raspberry Pi: Price Finder - Calibex Case for Raspberry Pi Computer.clear Acrylic Plexiglas. 3mm Thick.removable front... The case comes as 6 pieces that snap together, made of clear acrylic. Raspberry Pi - Compare Prices, Reviews and Buy at Nextag Case for Raspberry Pi Computer.clear Acrylic Plexiglas. 3mm Thick.removable front... The case comes as 6 pieces that snap together, made of clear acrylic. Amazon.com: Customer Reviews: Case for Raspberry Pi Computer ... This review is from: Case for Raspberry Pi Computer.clear Acrylic Plexiglas. 2mm Thick.removable front (Electronics) First Steps Dsi - Camera and Game Selections Case for Raspberry Pi Computer.clear Acrylic Plexiglas. 3mm Thick.removable front.with LEGO holes. Our Rating: $18.00. Baby Jogger 2012 City Mini Single Stroller, ... Case for Raspberry Pi Computer.clear Acrylic Plexiglas. 2mm ... Case for Raspberry Pi Computer.clear Acrylic Plexiglas. 2mm Thick.removable front 1: Case for Raspberry Pi Computer.clear Acrylic Plexiglas. 2mm Thick.removable ... PC Case: (Page 7) Case for Raspberry Pi Computer.clear Acrylic Plexiglas. 2mm Thick.removable front. ... Case for Raspberry Pi Computer.clear Acrylic Plexiglas. 2mm Thick.removable front; Case for Raspberry Pi Computer.clear Acrylic Plexiglas. 2mm ... Case for Raspberry Pi Computer.clear Acrylic Plexiglas. 2mm Thick.removable front. Merchant: guitarreria. $18.00. Click Here to Compare Additional Sellers. Case for Raspberry Pi Computer.clear Acrylic Plexiglas. 3mm ... The case comes as 6 pieces that snap together, made of clear acrylic. This ingenious design has no screws or standoffs and there are cute little feet cut into the ...